Venator Feed20S 6V feeding machine - Metal

Product detailed description

Venator Feed20S metal feeding machine with adjustable timing. Designed to spread feed in 360°.

The feeding machine is made entirely of metal. The solid construction guarantees a long service life and partial protection against falling. The machine is built for outdoor use, so the body is waterproof. The feed dispenser has ready mounting holes and screws at the hopper for easy mounting to any barrel or other container for dispensing feed (we recommend a well-sealed container into which moisture cannot get. Moisture will spoil the feed and if wet feed gets into the spreader it will clog it).

Feed is dispensed into the hopper of the feed dispenser from the attached container and falls through the hopper into the spreader. The design allows the feed to be dispersed in a circle around the dispenser (360°). The diameter of the feed circle can be adjusted from 1 to 8 metres depending on the motor power setting (and feed consistency)! The frequency and intensity of the spreading (motor speed) can be adjusted. By adjusting the motor intensity you mainly influence the width of the feed spread. The setting of the feed length/time determines how much feed the machine will dispense. Up to 6 feeding times per day can be set on the feeding machine (to store this data we recommend inserting a battery into the control panel of the machine (type: - if the large battery is disconnected, the internal memory of the control panel is erased and a small additional battery will guarantee the storage of this data).

The feed machine can handle any bulk feed. From cereals to corn to various granulated mixtures of smaller diameter. Pay attention to the choice of feed container. The feed must not be moist - this will cause degradation of the feed and possible clogging of the hopper or the feed dispenser. The blades of the feed dispenser should not be damaged, but will not spin fast enough or will jam completely. In this case, just disconnect the feed machine from the battery, clean the hopper and spreader properly and check the functionality with a blank.

The feeding machine is powered by a battery that is inserted inside the body of the machine.Battery not included - We recommend to add a 6 V 4.5Ah battery. A solar panel can be added to the feeding machine (mounting kit included).Battery life (tests Guns and ammunition Šubrt): at a feeding frequency of 2x a day, at 75% power and a feeding time of 10s, the battery life when using the solar panel is up to 1 year! (It's important to be careful to orient the solar panel correctly and avoid shade as much as possible - any small obstruction of the solar panel can reduce recharging power by up to 60%).

Service of feeding machines in the Czech Republic! Spare parts in stock.